Quantcast
Navigation

iTaste SVD (Superior Vaping Device) VV & VW MOD

iTaste SVD (Superior Vaping Device) VV & VW MOD
Product Code: itaste-svd-body
Availability: Out Of Stock
Price: RM0.00
Qty:  
   - OR -   

iTaste SVD (Superior Vaping Device) VV & VW MOD

MOD BODY ONLY!!!

” button:  ON/OFF battery switch.

Quickly clicking it three times will enable or disable the battery. Once enabled, holding down the button will activate the battery.
 
Battery Capacity Display
The LED lights will show green, yellow or red to indicate whether there is full battery life, half capacity or charging needed.
 
There are three main buttons on the iTaste SVD:  “” button, "+" button and "-" button; all the functions can be activated by using those three buttons to change settings in one step, your chosen mode will be displayed on the digital screen.
 
“+” button: VV/VW+                
“-” button:  VV/VW-
 
ON Mode
Quickly clicking the “” button three times will turn the iTaste SVD on; your LED light will enter a blink from red, yellow to green; and the LCD will display “ON”. Then holding down the button will activate the battery.
 
 
Lock the selected Voltage or Wattage (Hold both the + and - buttons for five seconds)
After setting your voltage or wattage you can lock the setting to prevent accidental changes to your wattage or voltage. Press and hold both the + and - buttons for five seconds to lock your settings. The digital screen will show “ LOC ” and current setting parameter of voltage or wattage ,Press and hold the + and - button for five seconds a second time to unlock. Please note that all other functions (such as ohm check and battery check) are still functional while you have the voltage or wattage settings locked.
 
Variable Voltage Mode (“” and “-” = U0 )
Press the “” and “-” button simultaneously for 3 seconds to enter variable voltage mode. The digital screen will show “U0”. Voltage can be adjusted from 3.3 – 6.0 volts in .1 volt increments by pressing the “+” and “-” button.
 
Variable Wattage Mode (“” and “+” = P0 )
Press the “” and “+” button simultaneously for 3 seconds to enter variable wattage mode, the digit screen will show P0; Wattage can be adjusted from 3.0W – 15.0W in .5 watts increments by pressing “+” and “-” button.
 
Load Ohms Meter ( “+” + “-”=R )
Holding “+” and “-” button  simultaneously for 2 seconds, the digit screen will display load Ohms if there is any connection load in this product; the load Ohms range will be 0-9.9. The digit screen will display "NON" if no load has been detected.
 
Battery Voltage Memory ( “+”-3S/“-”-3S =B.V )
Holding either button “+” or button “-” for 3 seconds, the digit screen will display the current voltage of the battery.
 
OFF Mode
Quickly clicking “” button three times, the digit screen will show “OFF” and the battery will turn off.
 
LED Light Blinking Mode:
The LED light will blink in different colors to indicate the current battery voltage. When installed with a single battery, the default battery voltage range is 3.2V-4.5V; when installed with two batteries, the default battery voltage range is 4.6V-9V.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

iTaste SVD (Superior Vaping Device) VV & VW MOD

MOD BODY ONLY!!!

” button:  ON/OFF battery switch.

Quickly clicking it three times will enable or disable the battery. Once enabled, holding down the button will activate the battery.
 
Battery Capacity Display
The LED lights will show green, yellow or red to indicate whether there is full battery life, half capacity or charging needed.
 
There are three main buttons on the iTaste SVD:  “” button, "+" button and "-" button; all the functions can be activated by using those three buttons to change settings in one step, your chosen mode will be displayed on the digital screen.
 
“+” button: VV/VW+                
“-” button:  VV/VW-
 
ON Mode
Quickly clicking the “” button three times will turn the iTaste SVD on; your LED light will enter a blink from red, yellow to green; and the LCD will display “ON”. Then holding down the button will activate the battery.
 
 
Lock the selected Voltage or Wattage (Hold both the + and - buttons for five seconds)
After setting your voltage or wattage you can lock the setting to prevent accidental changes to your wattage or voltage. Press and hold both the + and - buttons for five seconds to lock your settings. The digital screen will show “ LOC ” and current setting parameter of voltage or wattage ,Press and hold the + and - button for five seconds a second time to unlock. Please note that all other functions (such as ohm check and battery check) are still functional while you have the voltage or wattage settings locked.
 
Variable Voltage Mode (“” and “-” = U0 )
Press the “” and “-” button simultaneously for 3 seconds to enter variable voltage mode. The digital screen will show “U0”. Voltage can be adjusted from 3.3 – 6.0 volts in .1 volt increments by pressing the “+” and “-” button.
 
Variable Wattage Mode (“” and “+” = P0 )
Press the “” and “+” button simultaneously for 3 seconds to enter variable wattage mode, the digit screen will show P0; Wattage can be adjusted from 3.0W – 15.0W in .5 watts increments by pressing “+” and “-” button.
 
Load Ohms Meter ( “+” + “-”=R )
Holding “+” and “-” button  simultaneously for 2 seconds, the digit screen will display load Ohms if there is any connection load in this product; the load Ohms range will be 0-9.9. The digit screen will display "NON" if no load has been detected.
 
Battery Voltage Memory ( “+”-3S/“-”-3S =B.V )
Holding either button “+” or button “-” for 3 seconds, the digit screen will display the current voltage of the battery.
 
OFF Mode
Quickly clicking “” button three times, the digit screen will show “OFF” and the battery will turn off.
 
LED Light Blinking Mode:
The LED light will blink in different colors to indicate the current battery voltage. When installed with a single battery, the default battery voltage range is 3.2V-4.5V; when installed with two batteries, the default battery voltage range is 4.6V-9V.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Tags: itaste
evape2u e-cigarette store © 2013